Hi
I got a bumper problem left to fix to get a mot on this zr and i got the same problem as on the picture, can someone help with best way to fix this and keep it from snapping.
100_0042.jpg
Hi
I got a bumper problem left to fix to get a mot on this zr and i got the same problem as on the picture, can someone help with best way to fix this and keep it from snapping.
100_0042.jpg
be a fibreglass job I thinks.
If at first you don't succeed, destroy all the evidence.
its plastic and its right on the bend.
yea, you may have to melt the 2 bits of plastic back together if its a clean break, then finish with fibreglass / filler.
(that't what I'd do anyway)
If at first you don't succeed, destroy all the evidence.
I did watch this do you think this would work on this same part?
https://www.youtube.com/watch?v=4hpGS5qtt-U
Some say it would some says it will not hold for long, I was told to plastic weld it but it seems to thin to get a good job.
can't see why it wouldn't work apart from the fact yours has cracked on a corner.
He's still joined the 2 sides together and filled it which will give it some strength.
If at first you don't succeed, destroy all the evidence.
Ok i'll give it a try saturday when i can get to my car, thx for the help
it may be repairable for a short amount of time but they break for a past time
I went and got one and gave someone that was very ungreatful my old one.