Getting the 160 ready for Nov trackday
Results 1 to 10 of 263
\r\n
\r\n
\r\n
\r\n \r\n
\r\n JOHNDQ\r\n \r\n
JOHNDQ is online now\r\n\r\n \r\n
\r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
\r\n \r\n \r\n
\r\n
\r\n
Join Date
Aug 2013
\r\n
Location
Bedford
\r\n \r\n
Posts
1,000
\r\n
\r\n\r\n
\r\n
Dislike / Like Alerts
\r\n
\r\n\r\n
\r\n\r\n
\r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n

\r\n Red face Getting the 160 ready for Nov trackday\r\n

\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Well at last im going to get the 160 on track at Bedford Autodrome Really looking forward to seeing what its like compared to my other track cars and having some proper fun with it So ive been spending a bit this week getting these few bits after already fitting the Avo springs
\n
\nGrooved disc\'s
\n
\nRear camber plates
\n
\nAnd a Gopro hero 3+ black to record the action
\n
\n
\nJust waiting for the EDC Yellow stuff pads, ATE Super blue brake fluid and motorsport oil to turn up and im ready wish me luck \r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n
\r\n -' + '->\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
\r\n
\r\n
\r\n\r\n'; pd[39131] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n lolsteve\r\n \r\n
    lolsteve is offline\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n lolsteve\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jul 2013
    \r\n \r\n \r\n
    Posts
    304
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Nice track gear, what pads are you using? I went on at combe with mintex discs and pads and found them to hold up to the abuse rather well
    \n
    \nWhats the difference between the camber shim you bought and this one
    \nhttp://www.ebay.co.uk/itm/Eibach-Rea...#ht_949wt_1161
    \nApart from yours is metal\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[39149] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Only going for EBC Yellows mate dont need nothing much and still want to use it on roads so dont fancy a track compound like on the others as the noise and dust is unreal! I got the camber plates from my local dealer (brown and gammons) who make and use use on there own race cars. I think the one\'s you have need setting up for adjustment etc the ones i have are just bolt on and job done\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n Last edited by JOHNDQ; 05-11-13 at 20:36.\r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[39141] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #4\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Steve220\r\n \r\n
    Steve220 is offline\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2013
    \r\n \r\n \r\n
    Posts
    119
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Are those discs for real? The grooves don\'t even vent! Where did you get the camber plates from, though? Could do with some for the turbo fish tank!\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[39150] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #5\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Dont vent... there only meant to be a mm or so deep to allow the pad face to be cleanned and let build up of gases escape, there the same design as the full race kit on the RS2000 but just not a two piece floating disc\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[39163] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #6\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Steve220\r\n \r\n
    Steve220 is offline\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2013
    \r\n \r\n \r\n
    Posts
    119
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Doesn\'t mean it\'s right lol. Gasses on grooved should vent out the ends ideally, allowing pressure build up and therefore heat. Otherwise they\'re just glorified dimpled discs, which we all know, are a gimmick.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[39165] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #7\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n I dont see how you can have a point when AP Racing, Alcon and Performance Friction all use a "tear drop" pattern for there professional Motorsport disc\'s which do not go to the edge\'s off there disc\'s
    \nhttp://www.alcon.co.uk/motorsport.html
    \nhttp://www.pfcbrakes.com/motorsports/v3-disc.aspx
    \nhttp://www.demon-tweeks.co.uk/motors...us-brake-discs
    \nAnd these look like "dimpled" disc\'s in PF\'s motorsport catalogue
    \nhttp://www.pfcbrakes.com/motorsports...ake-discs.aspx
    \nHispec\'s "full race" disc\'s
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n Last edited by JOHNDQ; 05-11-13 at 20:43.\r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[39169] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #8\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Leigh_EvoIX\r\n \r\n
    Leigh_EvoIX is offline\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n Leigh_EvoIX\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2012
    \r\n \r\n \r\n
    Posts
    498
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Lol. Owned steve220.
    \nVented means that its a double layer disc anyhow with the vents between front and back portions.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[39231] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #9\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Quote Originally Posted by Leigh_EvoIX\r\n View Post\r\n
    \r\n
    Lol. Owned steve220.
    \nVented means that its a double layer disc anyhow with the vents between front and back portions.
    \r\n \r\n
    \r\n
    \r\n
    Wasnt trying to put guy down lol just proving the point those disc\'s are fine what what im using then for. Im sure as a fellow Evo owner you know how many of the big players use that Alon disc and they all agree its the best kit out there\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[39762] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #10\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Well got the rear camber plates and brakes all fitted this morning so going sweet until got to the last Coner (o/s/f in this case) and someone as damaged the threads in the caliper carrier and instead of repairing it have just screwed in a M10x1.5mm bolt (should be M10x1.25mm) couldn\'t get a helicoil kit anywhere have to wait till Monday now \r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[40407] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #11\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Ex X Power\r\n \r\n
    Ex X Power is offline\r\n\r\n \r\n
    \r\n \r\n *Newbie*\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Nov 2013
    \r\n \r\n \r\n
    Posts
    16
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Have you used longer bolts with those camber plates? iirc they were supplied with the last ones I bought, If you use the std bolts you\'ll be kissing goodbye to the hub\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[40425] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #12\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Quote Originally Posted by Ex X Power\r\n View Post\r\n
    \r\n
    Have you used longer bolts with those camber plates? iirc they were supplied with the last ones I bought, If you use the std bolts you\'ll be kissing goodbye to the hub
    \r\n \r\n
    \r\n
    \r\n
    Yep come with new bolts\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[66962] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #13\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n All booked for this Sat
    \r\nhttp://www.javelintrackdays.co.uk/tr...per&Itemid=693\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[68130] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #14\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Well trackday went great just tried to get videos edited for uploads. With the track tyre\'s and new brakes was 3 seconds a lap quicker so couldnt be happier was nice to be over taking the other "normal" cars though the day what made the day was went a guy came upto me to ask about spec of car as he couldnt believe how well it was going round the track.... And he was a instructor there not bad of a standard ZR with 120k on the clock Only one problem which was oil temp\'s going to 120 degrees which limited play cooler needed
    \r\n
    \r\n
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[78594] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #15\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Quick update finally got all the oil cooler pipes made up, happy with it all and even made them up myself Defo made the right choice to mount it buy the coolant fan helps cool the oil while the car isnt moving highest oil temp today after a hard run and holding rpm up to 3000 on the drive was 90ish so its looking good
    \n
    \n
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[83794] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #16\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Well didnt make it to today\'s trackday so re booked for May 19th so far there\'s about 20 Clio\'s booked on so should be interesting made a start on painting the trackday wheels try and get it noticed a bit more \r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[92002] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #17\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Well thought id give it a polish this weekend as had a day with nothing to do i also had some orange paint left so thought i would do the door trims to i also redone the silver as was really faded. Once paint as hardened i will bush over the "ZR" in orange to
    \r\n
    \r\n
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[94761] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #18\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[94769] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #19\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n New exhaust fitted today Scorpion cat back without the centre box
    \r\n
    \r\n
    \r\n
    \r\n
    \r\nSorry to the guy who pulled up with a MK1 160 while i was fitting it i couldnt move was holding it in place with me foot while i was bolting it up \r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[97218] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #20\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Booked up again this Monday for another trackday and for the first time ever there are two other MG\'s on track looking forward to seeing if the weight loss makes any difference \r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[113497] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #21\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Ok guys not been nothing going on with the ZR lately as was using the Evo for a while but back on it now. As im sure you all know last trackday was SO much better and sure you all saw the videos to prove Anyway aux water temp gauge will now work at long last, i removed the intake manifold due to a air leak and noticed one of the water ways is blacked off so i drilled and tapped the sender into there.....
    \n
    \n
    \n
    \nAlso while doing my checks i noticed where i had put in the oil pressure sensor for gauge it had hit the sub-frame at some point causing the thread to bend and start a small oil leak, theres approx 11mm of clearance there and i done a good to road miles before last trackday to check wasnt any clearance problems but looks like the engine moves a fair bit when going from 7000rpm to full braking. Ive checked mounts there all spot on so i will order a new sensor and fit it where the factory oil pressure switch is and get a new oil pressure swich in 1/8npt to go where if pressure sensor was to over come that problem (hope you are keeping with me)
    \nBit hard to see on pic but the bend is quite bad....
    \n
    \n
    \nIve also noticed the coolant hose that comes from the water outlet on the cylinder head (with temp sensors in) and then runs around back of engine is split so all in all was lucky to have gotten though last trackday Off to Cadwell Park end of August for another trackday really looking forward to this one \r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n Last edited by JOHNDQ; 30-07-14 at 20:23.\r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[115130] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #22\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Trackday preps started today with a cut hair to the slicks to get rid of the bad rubber and s**t picked up from last time out. Need to make sure alls ok brothers bringing his track toy a Fiesta Zetec S with a 1.7 Puma engine so cant have him beating me
    \n
    \nFrom this....
    \n
    \n
    \nTo this.....
    \n
    \n
    \nQuite a bit had to come off....
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[130057] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #23\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Nicked the oil catch tank off the Evo today as its not going any where for a while Just gotta get the air filter sorted now then can get booked with MG\'s on track for a trackday this Saturday
    \r\n
    \r\n
    \r\nNew home on the ZR...
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[130241] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #24\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Good news filters came from today and they fit thank god. There only for time being as planning on getting a uprated pedal box so can run a Exige airbox or similar but ok for trackday this Saturday to test out the throttle bodies for real Its at Bedford Autodrome with Lotus/MG\'s on track so if your local come down should be a few nice cars there
    \n
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n Last edited by JOHNDQ; 30-01-15 at 18:34.\r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[130321] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #25\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Stayed out working on the car till 11pm last night in the freezing cold to make sure everything was ok for Saturdays trackday but at 1pm today got a email saying the event was cancelled due to the weather. Not to happy as i really dont feel its that bad but understand some people didnt feel the same. Any way quick pic\'s of the filters and oil catch tank fitted
    \n
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n Last edited by JOHNDQ; 30-01-15 at 18:33.\r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[130849] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #26\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Had a evening @ EPS Motorsport tonight to sort out the plans for ZR and get the fuel injectors flow tested and have filters changed. Couldnt believe it all injectors flowed perfect and at 5bar they make best spray pattern and 272cc so good for 244bhp or 210cc at 3bar So we are going with a Emerald K6 control unit with 3 different maps and looking into wideband O2 plus knock control and rolling road/mapping session start of April
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[131065] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #27\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Ok pulled the engine tonight, it needs belts doing, a new clutch and seems to have a fair oil leak now so going to replace said items plus all gaskets and seals and looking into "N" series HG, uprated bolts and oil rail.... as long as liner heights are ok of course
    \n
    \n
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[131097] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #28\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Engine on stand ready for strip down
    \r\n
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[131145] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #29\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Engine down to block and crank now
    \n
    \n
    \nCleaned up some parts today.....
    \n
    \n
    \nAnd tomoz have this dirty piece of **** to look forward to
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[131305] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #30\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Well as normal job not quite going to be a easy as i thought, liners had dropped slightly, main bearing shells have picked up a bit and steel headgasket had marked the head quite bad so now everythings gone away for a hot wash and skim. Didnt really want to go this far but never mind just decoded the main and big end bearing tables so can get the right ones ordered ago with some liner shims while the head is with engineers
    \n
    \n
    \n
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[131657] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #31\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Busy getting everything cleaned and ready to put back together this week, everything came up really good
    \n
    \n
    \n
    \nBearing came today too
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[131777] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #32\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Started to build few bits up today, new bearings, crankshaft and crank all back together now with some Millers assembly lube. Sealant put in correct places and rolled even
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[132050] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #33\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Engine almost done now.....
    \n
    \nNew and old oil rails...
    \n
    \n
    \nBlock all cleaned ready for liners...
    \n
    \n
    \nPistons and liners in, new type N series gasket fitted i also fitted 4thou shims as liners were only sitting level...
    \n
    \n
    \nHead all bolt on with the new 10.5 grade bolts and new torque setting...
    \n
    \n
    \n
    \nSealant on and rolled flat...
    \n
    \n
    \n
    \nCam Carrier, cams and VVC units all in too...
    \n
    \nAnd almost there now...
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[132250] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #34\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n ECU is here at last Cant really moan about the wait tho as got a really good deal on the unit
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[132474] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #35\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Few more bits today, popped down to DVA power to get a set of Cam seals and a rear crank seal.
    \n
    \n
    \nTime to start the wiring, i\'m moving the Emerald into the car so i will be making up a whole new wiring loom from sratch so ive stripped out the factory loom just to make sure the wiring info i have been sent is correct (which it is) Now just a case of making a list to order all the wires, muti-plugs, terminals etc
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[132618] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #36\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Progress been bit slow lately but got the ECU location mocked up today so will shoot down local engineering firm Tuesday to get a nice alloy plate made up
    \r\n
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[133226] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #37\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Made a bit of progress this week....
    \r\nNew timing belt cover came only Rimmer Bro\'s had this
    \r\n
    \r\n
    \r\nEngine waiting to meant the gearbox again
    \r\n
    \r\n
    \r\nNice new AP clutch
    \r\n
    \r\n
    \r\nZR set-up in garage
    \r\n
    \r\n
    \r\nAnd at last engine out of kitchen and back where it should be
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[134386] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #38\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n On to wiring today the end is in view just need the shielded cable for cam/crank sensors and new muti-plugs for the sensors/injectors etc to turn up now and we\'l have a complete new engine wiring loom.
    \r\n
    \r\n
    \r\n
    \r\n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[135362] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #39\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Nearly have everything for the wiring now just waiting for the brown and grey Junior power timer connectors, bit more shielded cable, few solder sheeves etc etc...
    \n
    \n
    \n
    \nBit stuck until then so added some "service loops" just before the contacts crimps....
    \n\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[138185] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #40\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n JOHNDQ\r\n \r\n
    JOHNDQ is online now\r\n\r\n \r\n
    \r\n \r\n Senior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n JOHNDQ\'s Avatar\r\n \r\n
    \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Aug 2013
    \r\n
    Location
    Bedford
    \r\n \r\n
    Posts
    1,000
    \r\n
    \r\n\r\n
    \r\n
    Dislike / Like Alerts
    \r\n
    \r\n\r\n
    \r\n\r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Finally got back on car today....
    \r\nRemoved the 6 pins i needed from the small ECU connector and placed them in there new housings so i didnt have to cut the loom still on the car incase ever has to go back to standard for any reason. These are the out puts to the fuel pump, cooling fan, main relays etc switched from the Emerald
    \r\n
    \r\n
    \r\nPins from factory loom into plug.....
    \r\n
    \r\n
    \r\nAnd joint into the male plug on my loom....
    \r\n
    \r\n
    \r\nAfter a few more checks finally turned on the key, POWER....
    \r\n
    \r\n
    \r\nAnd comms
    \r\n
    \r\n
    \r\nBase VVC map in....
    \r\n
    \r\n
    \r\nShould be running again tomoz.... i hope\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; // next/previous post info pn[39130] = "158858,39131"; pn[0] = ",39130"; pn[39131] = "39130,39149"; pn[39149] = "39131,39141"; pn[39141] = "39149,39150"; pn[39150] = "39141,39163"; pn[39163] = "39150,39165"; pn[39165] = "39163,39169"; pn[39169] = "39165,39231"; pn[39231] = "39169,39762"; pn[39762] = "39231,40407"; pn[40407] = "39762,40425"; pn[40425] = "40407,66962"; pn[66962] = "40425,68130"; pn[68130] = "66962,78594"; pn[78594] = "68130,83794"; pn[83794] = "78594,92002"; pn[92002] = "83794,94761"; pn[94761] = "92002,94769"; pn[94769] = "94761,97218"; pn[97218] = "94769,113497"; pn[113497] = "97218,115130"; pn[115130] = "113497,120994"; pn[120994] = "115130,130057"; pn[130057] = "120994,130241"; pn[130241] = "130057,130321"; pn[130321] = "130241,130849"; pn[130849] = "130321,131065"; pn[131065] = "130849,131097"; pn[131097] = "131065,131145"; pn[131145] = "131097,131305"; pn[131305] = "131145,131657"; pn[131657] = "131305,131777"; pn[131777] = "131657,132050"; pn[132050] = "131777,132250"; pn[132250] = "132050,132474"; pn[132474] = "132250,132618"; pn[132618] = "132474,133226"; pn[133226] = "132618,134386"; pn[134386] = "133226,135362"; pn[135362] = "134386,138185"; pn[138185] = "135362,139497"; pn[139497] = "138185,139921"; pn[139921] = "139497,143729"; pn[143729] = "139921,144345"; pn[144345] = "143729,144386"; pn[144386] = "144345,145058"; pn[145058] = "144386,145082"; pn[145082] = "145058,145690"; pn[145690] = "145082,145994"; pn[145994] = "145690,146169"; pn[146169] = "145994,146177"; pn[146177] = "146169,146441"; pn[146441] = "146177,146609"; pn[146609] = "146441,146985"; pn[146985] = "146609,147145"; pn[147145] = "146985,147265"; pn[147265] = "147145,147417"; pn[147417] = "147265,147513"; pn[147513] = "147417,147657"; pn[147657] = "147513,148402"; pn[148402] = "147657,148489"; pn[148489] = "148402,148625"; pn[148625] = "148489,148626"; pn[148626] = "148625,148658"; pn[148658] = "148626,148818"; pn[148818] = "148658,148986"; pn[148986] = "148818,149058"; pn[149058] = "148986,149474"; pn[149474] = "149058,150002"; pn[150002] = "149474,150257"; pn[150257] = "150002,150281"; pn[150281] = "150257,151105"; pn[151105] = "150281,151801"; pn[151801] = "151105,152073"; pn[152073] = "151801,152313"; pn[152313] = "152073,153329"; pn[153329] = "152313,153969"; pn[153969] = "153329,154017"; pn[154017] = "153969,154145"; pn[154145] = "154017,154954"; pn[154954] = "154145,155250"; pn[155250] = "154954,155458"; pn[155458] = "155250,155513"; pn[155513] = "155458,155602"; pn[155602] = "155513,155810"; pn[155810] = "155602,156098"; pn[156098] = "155810,156258"; pn[156258] = "156098,156281"; pn[156281] = "156258,156290"; pn[156290] = "156281,156385"; pn[156385] = "156290,156585"; pn[156585] = "156385,156738"; pn[156738] = "156585,156777"; pn[156777] = "156738,156858"; pn[156858] = "156777,156969"; pn[156969] = "156858,157194"; pn[157194] = "156969,157426"; pn[157426] = "157194,157618"; pn[157618] = "157426,158690"; pn[158690] = "157618,40410"; pn[40410] = "158690,40426"; pn[40426] = "40410,40430"; pn[40430] = "40426,40431"; pn[40431] = "40430,40436"; pn[40436] = "40431,40432"; pn[40432] = "40436,40455"; pn[40455] = "40432,40457"; pn[40457] = "40455,40449"; pn[40449] = "40457,40465"; pn[40465] = "40449,40468"; pn[40468] = "40465,40470"; pn[40470] = "40468,40472"; pn[40472] = "40470,40474"; pn[40474] = "40472,40476"; pn[40476] = "40474,40477"; pn[40477] = "40476,40529"; pn[40529] = "40477,40533"; pn[40533] = "40529,40538"; pn[40538] = "40533,40534"; pn[40534] = "40538,40539"; pn[40539] = "40534,40540"; pn[40540] = "40539,40542"; pn[40542] = "40540,40545"; pn[40545] = "40542,40547"; pn[40547] = "40545,40548"; pn[40548] = "40547,40549"; pn[40549] = "40548,40568"; pn[40568] = "40549,40571"; pn[40571] = "40568,40577"; pn[40577] = "40571,40579"; pn[40579] = "40577,40593"; pn[40593] = "40579,40596"; pn[40596] = "40593,40850"; pn[40850] = "40596,40600"; pn[40600] = "40850,40607"; pn[40607] = "40600,40618"; pn[40618] = "40607,40858"; pn[40858] = "40618,40978"; pn[40978] = "40858,41442"; pn[41442] = "40978,41450"; pn[41450] = "41442,41466"; pn[41466] = "41450,41586"; pn[41586] = "41466,41626"; pn[41626] = "41586,41650"; pn[41650] = "41626,41738"; pn[41738] = "41650,59834"; pn[59834] = "41738,65881"; pn[65881] = "59834,65897"; pn[65897] = "65881,65913"; pn[65913] = "65897,65921"; pn[65921] = "65913,65929"; pn[65929] = "65921,65937"; pn[65937] = "65929,65945"; pn[65945] = "65937,68186"; pn[68186] = "65945,68234"; pn[68234] = "68186,68474"; pn[68474] = "68234,68490"; pn[68490] = "68474,72369"; pn[72369] = "68490,72473"; pn[72473] = "72369,72489"; pn[72489] = "72473,72673"; pn[72673] = "72489,73186"; pn[73186] = "72673,75297"; pn[75297] = "73186,90474"; pn[90474] = "75297,90498"; pn[90498] = "90474,90522"; pn[90522] = "90498,92098"; pn[92098] = "90522,92106"; pn[92106] = "92098,92122"; pn[92122] = "92106,92130"; pn[92130] = "92122,94473"; pn[94473] = "92130,123530"; pn[123530] = "94473,123682"; pn[123682] = "123530,128482"; pn[128482] = "123682,129650"; pn[129650] = "128482,129658"; pn[129658] = "129650,129666"; pn[129666] = "129658,129810"; pn[129810] = "129666,131073"; pn[131073] = "129810,131089"; pn[131089] = "131073,131081"; pn[131081] = "131089,131161"; pn[131161] = "131081,131169"; pn[131169] = "131161,131177"; pn[131177] = "131169,131185"; pn[131185] = "131177,131193"; pn[131193] = "131185,131201"; pn[131201] = "131193,131209"; pn[131209] = "131201,133250"; pn[133250] = "131209,133258"; pn[133258] = "133250,135394"; pn[135394] = "133258,135410"; pn[135410] = "135394,135418"; pn[135418] = "135410,135426"; pn[135426] = "135418,136049"; pn[136049] = "135426,136057"; pn[136057] = "136049,136081"; pn[136081] = "136057,136177"; pn[136177] = "136081,138201"; pn[138201] = "136177,138217"; pn[138217] = "138201,139513"; pn[139513] = "138217,139569"; pn[139569] = "139513,139577"; pn[139577] = "139569,139633"; pn[139633] = "139577,139649"; pn[139649] = "139633,139657"; pn[139657] = "139649,139665"; pn[139665] = "139657,139673"; pn[139673] = "139665,140369"; pn[140369] = "139673,140377"; pn[140377] = "140369,140385"; pn[140385] = "140377,140393"; pn[140393] = "140385,143001"; pn[143001] = "140393,143753"; pn[143753] = "143001,143769"; pn[143769] = "143753,143785"; pn[143785] = "143769,144402"; pn[144402] = "143785,144410"; pn[144410] = "144402,144882"; pn[144882] = "144410,144890"; pn[144890] = "144882,145010"; pn[145010] = "144890,145138"; pn[145138] = "145010,145290"; pn[145290] = "145138,145322"; pn[145322] = "145290,145338"; pn[145338] = "145322,145354"; pn[145354] = "145338,145402"; pn[145402] = "145354,145658"; pn[145658] = "145402,145698"; pn[145698] = "145658,145706"; pn[145706] = "145698,147489"; pn[147489] = "145706,148666"; pn[148666] = "147489,148706"; pn[148706] = "148666,149482"; pn[149482] = "148706,149498"; pn[149498] = "149482,149954"; pn[149954] = "149498,153185"; pn[153185] = "149954,153985"; pn[153985] = "153185,154001"; pn[154001] = "153985,154009"; pn[154009] = "154001,154153"; pn[154153] = "154009,154626"; pn[154626] = "154153,154634"; pn[154634] = "154626,154866"; pn[154866] = "154634,155818"; pn[155818] = "154866,155826"; pn[155826] = "155818,156049"; pn[156049] = "155826,156266"; pn[156266] = "156049,156322"; pn[156322] = "156266,156338"; pn[156338] = "156322,157434"; pn[157434] = "156338,157442"; pn[157442] = "157434,157450"; pn[157450] = "157442,157490"; pn[157490] = "157450,157522"; pn[157522] = "157490,157562"; pn[157562] = "157522,157570"; pn[157570] = "157562,157586"; pn[157586] = "157570,158858"; pn[158858] = "157586,39130"; // cached usernames pu[0] = guestphrase; pu[1425] = "JOHNDQ"; pu[1315] = "lolsteve"; pu[1560] = "Steve220"; pu[132] = "Leigh_EvoIX"; pu[1770] = "Ex X Power"; pu[20] = "Jumbo77"; pu[657] = "petrol-head16v"; pu[31] = "Longerz"; pu[35] = "hyphon12"; pu[39] = "Chris"; pu[1045] = "Travis"; pu[45] = "Nasty"; pu[5962] = "Levaz"; pu[10826] = "Fr3nchy"; pu[11098] = "dave87"; pu[8402] = "peter.gotham"; pu[3938] = "flattop"; pu[14705] = "k18ltr260"; pu[15785] = "ashjones86"; pu[15514] = "yellowzrs"; pu[16074] = "Shizbiz"; // -->

    Threaded View

    1. #1
      Senior Member
      Join Date
      Aug 2013
      Location
      Bedford
      Posts
      1,000
      Dislike / Like Alerts

      Red face Getting the 160 ready for Nov trackday

      Well at last im going to get the 160 on track at Bedford Autodrome Really looking forward to seeing what its like compared to my other track cars and having some proper fun with it So ive been spending a bit this week getting these few bits after already fitting the Avo springs

      Grooved disc's

      Rear camber plates

      And a Gopro hero 3+ black to record the action


      Just waiting for the EDC Yellow stuff pads, ATE Super blue brake fluid and motorsport oil to turn up and im ready wish me luck

     

     

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  
    Powered by vBulletin® Version 4.2.1
    Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.
    Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
    Image resizer by SevenSkins
    vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
    Copyright © MGZROwnersClub.co.uk
    All times are GMT +1. The time now is 17:41.