Help with warn hub screws

[philwatts]

Hi

I am going to try again tomorrow to get this rear hub changed but last Saturday me and my brother tried to change the hub but the 2 case screws would not turn and well started to mess the screw up, we still got some edge to use a screw driver but don't want to take the heads off the screws to get the case off for the hub.

Does anyone know a good was to get these screws off as they feel over screwed.

[J70DDO]

Drill them and re tap them then use these :- http://mgmanialtd.com/index.php?id_p...roller=product
And cover them in copper grease that's what I've done ,my front ones were easy to get off rears were a pain in the arse
Good luck

[philwatts]

Dam ok thanks man something i was trying not to do but if i have to.

[JOHNDQ]

Use a impact driver

[mr vandango]

I struggled for a little bit on one of my front disc retaining screws until I pulled out the impact driver with a pz3 bit in it. Came out a treat then.

[Longerz]

if your replacing the discs as well just beat the crap out of the disc it will brake the head of the screw then just use mole grips to remove the remains