-
*Newbie*
Blower Problems
Hi all
Got an issue with my blowers...
They work on 3 and 4 just not 1 and 2. I purchased a new heater control unit and swapped out the switch but still the same am i gonna have to take off the entire dash to see if there is an issue with the motor? Thanks
-
-
Senior Member
If at first you don't succeed, destroy all the evidence.
-
Senior Member
You'll love the answer to this!
It'll take you around 15 mins and £5 to fix!
If you remove the glove box (2x 10mm bolts underneath.
Then remove the bar across (makes for easier access)
On the left is a little black box with a wiring plug going into it.
Inside the box is a 4 way resistor.
4 way - 4 fan speeds (see where this is going?)
replace the resistor and put it all back together.
Quite a common problem on these.
I'd recommend a new resistor with a ceramic coating, they last longer
http://www.ebay.co.uk/itm/SmartSense...item1c5092397e
If at first you don't succeed, destroy all the evidence.
-
Dislike / Like Alerts - 3 Likes, 0 Dislikes
-
-
*Newbie*
ok so i got the Glove Box out and low and behold i find the Resistor completely burnt through on 2 of the 3 sides. I have now completely removed.
On another not I do not have Air Conditioning. When i popped open the pollen filter slot there was nothing in there.... Is this just for AC cars or should i have one?
-
Senior Member
some came with them fitted, some came without.
Both of mine have them in, but only 1 has AC lol
Pollen filters are about £4 from Euro Car Parts.
(see my thread for an awesome pollen filter mod )
If at first you don't succeed, destroy all the evidence.
-
*Newbie*