bumper or bonnet bad fit

[mallorcaben]

Just bought this ZR.
It was involved in a small accident a few years ago and the bumper assembly was replaced.
Something doesnt fit right.
What do you reckon guys, is it easily fixable?

20150718_200427_Avinguda Miguel Unamuno.jpg

[Levaz]

Looking at the photo, i'd say it was the bumper that's sagging down.
Should be easy to solve, take it off and have a look behind it, it may be something simple

[philwatts]

I think i have this same problem. its pushed out so far so you got gaps and its the crash bar is not the right one.

would like a fix for this if its the same problem

[mallorcaben]

20150803_200007_Carrer de L'Estany Petit.jpg20150803_195954_Avinguda França.jpg

[ben]

That's normal MG/R panel gap !

To get it fitting as best it can, loosen all bolts (top, sides, and bottom) jack the bumper up where you think it should sit, and then tighten all the bolts. Let go of the jack and cross fingers.

[philwatts]

That's normal MG/R panel gap !

To get it fitting as best it can, loosen all bolts (top, sides, and bottom) jack the bumper up where you think it should sit, and then tighten all the bolts. Let go of the jack and cross fingers.

Well this is not my problem then as i did this already and still my bumper is lined up yet the crash bar is still pushing my bumper out so i got massive gaps around my lights