coolant bleeding and flush!!!

[Dave Askey]

ll. im looking for advise on how the best way to bleed the coolant on my zr now ive FIANALLY done the head gasket and got it up and running.

small problem tho. i filled the water up and squeezed the pipes only fo the header tank to fill back with oil. before tho the water wasnt going round the system so im just hoping its what was in the pipes from before

i did the bleed valve but stil nothing, took the botom hose off and drained the water to get rid of the oil. topped it up again and this time when squeezing the pipes it was brown sludge. so its getting there

[Steve220]

your best bet is to fill it with a concentration of coolant, run it for a around 25 miles up to temp then drain. Hopefully you'll flush the rubbish out!